Cisco 4500M

2-485
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
tx-queue
Switch(config-if-tx-queue)# bandwidth 1000000000
Switch(config-if-tx-queue)#
This example shows how to configure transmit queue 3 to the high priority:
Switch(config-if)# tx-queue 3
Switch(config-if-tx-queue)# priority high
Switch(config-if-tx-queue)#
This example shows how to configure the traffic shaping rate of 64 kbps to transmit queue 1:
Switch(config-if)# tx-queue 1
Switch(config-if-tx-queue)# shape 64000
Switch(config-if-tx-queue)#
Related Commands show qos interface