Cisco 4500M Command Reference

Index
IN-13
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
enabling BPDU filtering on an interface 2-420
enabling BPDU guard by default on all PortFast
ports 2-444
enabling BPDU guard on an interface 2-422
enabling extended system ID 2-425
enabling loop guard as a default on all ports 2-428
enabling PortFast by default on all access ports 2-445
enabling PortFast mode 2-440
enabling protocol tunneling for 2-157
enabling root guard 2-426
enabling spanning tree BackboneFast 2-419
enabling spanning tree on a per VLAN basis 2-449
enabling spanning tree UplinkFast 2-447
setting an interface priority 2-446
setting drop threshold for 2-159
setting pathcost 2-423
setting the default pathcost calculation method 2-439
subinterface configuration mode, summary 1-6
SVI
creating a Layer 3 interface on a VLAN 2-110
switchport 2-474
switchport block command 2-461
switchport interfaces
displaying status of Layer 3 port 2-286
displaying status of native VLAN tagging 2-286
switchport mode command 2-462
switchport port-security aging command 2-468
switchport port-security command 2-464
switch shim
debugging 2-68
disabling debugging 2-68
switch to router connection
enabling Cisco-recommended features 2-176
switch to switch connection
enabling Cisco-recommended features 2-178
switch virtual interface
See SVI
sw-vlan 2-71
system prompts 1-5
T
Tab key
command completion 1-1
tables
characters with special meaning 1-7
mac access-list extended subcommands 2-163
match syntax description 2-19
multipliers 1-9
relationship between duplex and speed
commands 2-452
show vlan command output fields 2-405
show vtp command output fields 2-410
special characters 1-9
special characters used for anchoring 1-10
speed command options 2-451
TAC
displaying information useful to TAC 2-394
TCAM
debugging spanning tree activities 2-66
temperature readings
displaying information 2-258
timer information 2-262
traffic shaping
enable on an interface 2-237
traps, enabling 2-415
trunk encapsulation
setting format 2-474
trunk interfaces
displaying trunk interfaces information 2-293
trust state
setting 2-117
tunnel ports
displaying information about Layer 2 protocol 2-329
TX queues
allocating bandwidth 2-484
returning to default values 2-484
setting priority to high 2-484
specifying burst size 2-484

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English