Cisco ASR 9901 Hardware Installation Guide

Figure 60: Unpacking the Cisco ASR 9001 Router from the Shipping Container
Cardboard cap4Cardboard packaging
container
1
Foam packaging material
- bottom cap
5Accessory tray2
Foam packaging material-
top caps
3
Procedure
Step 1 Cut the packaging tape and open the cardboard shipping container.
Step 2 Remove the accessory box.
Step 3 Remove the packaging material (see the below figure).
a) Remove the foam packaging material from the top of the router.
b) Remove the cardboard cap from the side of the router.
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
47
Unpacking and Installing the Chassis
Unpacking the Router

Cisco ASR 9901 Specifications

General

Chassis Height	1 RU
Rack Mounting	Yes
Redundancy	Yes
Operating System	Cisco IOS XR
Switching Capacity	Up to 1.2 Tbps
Memory	16 GB
Power Supply	Dual redundant AC or DC
Interfaces	10GE, 100GE
Operating Temperature	0 to 40°C (32 to 104°F)
Input Voltage	100-240V AC
Power Consumption	Varies based on configuration
Storage	64 GB SSD
Humidity	5% to 95% (non-condensing)