Cisco Catalyst 6500 Series - Page 130

Index
IN-2
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
OL-9041-04
Catalyst 6509 switch (figure) 2-3
Cisco 7600 SIP-200
DIP Switch Settings 2-7
faceplate (figure) 2-4
Memory Installation and Removal 2-6
Memory Options 2-6
SPA compatibility (table) 1-3, 1-4, 1-5
subslot numbering 2-4
Cisco 7600 SIP-400
faceplate (figure) 2-9
SPA compatibility (table) 1-3, 1-4, 1-5
Cisco 7600 SIP-600
SPA compatibility (table) 1-3, 1-4, 1-5
configure terminal command 5-7
connectors
SC type (figure) 3-30
D
deactivation
verifying for SIPs 5-3
verifying for SPAs 5-6
G
GBIC-SX 3-34
H
hw-module subslot shutdown command 5-5, 5-8
I
interface processor
tools and parts required for installation 4-1
intermediate reach
SFP module 3-27
SFP optical transceiver module 3-22
intermediate-reach
XFP optical transceiver module 3-33
IPSec 3-57
IPSec VPN SPA
LEDS 3-57
L
LC-type cable
(figure) 3-34
LC-type cable (figure) 3-23
long reach
optical transceiver module 3-22
SFP module 3-27
M
multimode
MTP-type connectors 3-38
SFP optical transceiver module 3-22
N
no hw-module subslot shutdown command 5-6, 5-8
no power enable module command 5-2, 5-3, 5-7
O
OC-12c/STM-4 POS SPA
bandwidth 3-21
cables 3-22, 3-23
faceplate (figure) 3-21
interface specifications 3-22
LEDs 3-21
(figure) 3-21
descriptions (table) 3-21
optical transceiver modules 3-22
OC-192c/STM-64 POS/RPR SPA