Cisco IE 3000 User Manual

1-11
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Chapter 1 Overview
Default Settings After Initial Switch Configuration
• TACACS+ is disabled. For more information, see Chapter 9, “Configuring Switch-Based
Authentication.”
• RADIUS is disabled. For more information, see Chapter 9, “Configuring Switch-Based
Authentication.”
• The standard HTTP server and Secure Socket (SSL) HTTPS server are both enabled. For more
information, see
Chapter 9, “Configuring Switch-Based Authentication.”
• IEEE 802.1x is disabled. For more information, see Chapter 10, “Configuring IEEE 802.1x
Port-Based Authentication.”
• Port parameters
– Interface speed and duplex mode is autonegotiate. For more information, see Chapter 11,
“Configuring Interface Characteristics.”
– Auto-MDIX is enabled. For more information, see Chapter 11, “Configuring Interface
Characteristics.”
– Flow control is off. For more information, see Chapter 11, “Configuring Interface
Characteristics.”
• VLANs
– Default VLAN is VLAN 1. For more information, see Chapter 13, “Configuring VLANs.”
– VLAN trunking setting is dynamic auto (DTP). For more information, see Chapter 13,
“Configuring VLANs.”
– Trunk encapsulation is negotiate. For more information, see Chapter 13, “Configuring VLANs.”
– VTP mode is server. For more information, see Chapter 14, “Configuring VTP.”
– VTP version is Version 1. For more information, see Chapter 14, “Configuring VTP.”
– Voice VLAN is disabled. For more information, see Chapter 15, “Configuring Voice VLAN.”
• STP, PVST+ is enabled on VLAN 1. For more information, see Chapter 16, “Configuring STP.”
• MSTP is disabled. For more information, see Chapter 17, “Configuring MSTP.”
• Optional spanning-tree features are disabled. For more information, see Chapter 18, “Configuring
Optional Spanning-Tree Features.”
• Flex Links are not configured. For more information, see Chapter 19, “Configuring Flex Links and
the MAC Address-Table Move Update Feature.”
• DHCP snooping is disabled. The DHCP snooping information option is enabled. For more
information, see
Chapter 20, “Configuring DHCP Features.”
• IGMP snooping is enabled. No IGMP filters are applied. For more information, see Chapter 21,
“Configuring IGMP Snooping and MVR.”
• IGMP throttling setting is deny. For more information, see Chapter 21, “Configuring IGMP
Snooping and MVR.”
• The IGMP snooping querier feature is disabled. For more information, see Chapter 21, “Configuring
IGMP Snooping and MVR.”
• MVR is disabled. For more information, see Chapter 21, “Configuring IGMP Snooping and MVR.”

Cisco IE 3000 Specifications

General

Operating Temperature	-40 to 75°C (-40 to 167°F)
DRAM	128 MB
Flash Memory	32 MB
Uplink Ports	2 x 10/100/1000Base-T or SFP
MAC Address Table Size	8000
Mounting	DIN rail, Wall