1-19
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Chapter 1 Overview
Where to Go Next
Cell Network—Redundant-Star Topology
In a redundant-star topology, every Layer 2 access switch has dual connections to a Layer 3 distribution
switch. Devices are connected to the Layer2 switches. See
Figure 1-4.
• Any Layer 2 switch is always only two hops to another Layer 2 switch.
• In the Layer 2 network, each switch has dual connections to the Layer 3 devices.
• The Layer 2 network is maintained even if multiple connections are lost.
Figure 1-4 Cell Network–Redundant Star Topology
Where to Go Next
Before configuring the switch, review these sections for startup information:
• Chapter 2, “Using the Command-Line Interface”
• Chapter 4, “Assigning the Switch IP Address and Default Gateway”
204321
Human
Machine
Interface
(HMI)
IE
3000
Cell Zone
Catalyst 3750
Stackwise
Switch
Stack
Controllers, Drives,
and Remote I/O