Cisco IE 3000 - Monitoring VTP

14-16
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Chapter 14 Configuring VTP
Monitoring VTP
Monitoring VTP
You monitor VTP by displaying VTP configuration information: the domain name, the current VTP
revision, and the number of VLANs. You can also display statistics about the advertisements sent and
received by the switch.
Table 14-3 shows the privileged EXEC commands for monitoring VTP activity.
Ta b l e 14-3 VTP Monitoring Commands
Command Purpose
show vtp status Display the VTP switch configuration information.
show vtp counters Display counters about VTP messages that have been sent and received.