2-48
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
controller BITS output applique
Command History
Examples This example shows how to set the output line type to T1 with ESF framing and B8ZS line coding and
a line buildout of 0 to 133 feet:
Switch(config)# controller BITS output applique T1 framing esf linecode ami b8zs
build-out 0-133ft
Switch(config)# exit
Related Commands
Release Modification
12.2(52)EY This command was introduced.
Command Description
show controller bits Displays BITS configuration for the switch.
To Next Page
Loading...
Need help?
General
