Cisco Nexus 3548 series - Copying the Package File to a Local Storage Device or Network Server

PurposeCommand or Action
Verifies that the system clock is correct.
Software operations use certificates based on
device clock times.
show clock
Example:
switch# show clock
Step 3
Example
This example shows how to display the active packages for the entire system. Use this information
to determine if a software change is required.
switch# show install active
Active Packages:
Active Packages on Module #3:
Active Packages on Module #6:
Active Packages on Module #7:
Active Packages on Module #22:
Active Packages on Module #30:
This example shows how to display the current system clock setting:
switch# show clock
02:14:51.474 PST Wed Jan 04 2014
Copying the Package File to a Local Storage Device or Network
Server
You must copy the SMU package file to a local storage device or a network file server to which the device
has access. After this task is done, the package can be added and activated on the device.
If you need to store package files on the device, we recommend that you store the files on the hard disk. The
boot device is the local disk from which the package is added and activated. The default boot device is
bootflash:.
Before you copy package files to a local storage device, use the dir command to determine if the required
package files are already on the device.
Tip
If the SMU package files are located on a remote TFTP, FTP, or SFTP server, you can copy the files to a local
storage device. After the files are located on the local storage device, the package can be added and activated
on the device from that storage device. The following server protocols are supported:
• Trivial File Transfer Protocol—TFTP allows files to be transferred from one computer to another over
a network, usually without the use of client authentication (for example, username and password). It is
a simplified version of FTP.
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
192
Performing Software Maintenance Upgrades (SMUs)
Copying the Package File to a Local Storage Device or Network Server