Cisco Nexus 3548 series - Disabling Duplicate Message Throttling

Example
The following example shows how to configure the periodic inventory messages to generate every
20 days:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# periodic-inventory notification interval 20
switch(config-callhome)#
What to do next
Disable duplicate message throttling.
Disabling Duplicate Message Throttling
You can limit the number of duplicate messages received for the same event. By default, the switch limits the
number of duplicate messages received for the same event. If the number of duplicate messages sent exceeds
30 messages within a 2-hour time frame, the switch discards further messages for that alert type.
Procedure
PurposeCommand or Action
Enters global configuration mode.switch# configure terminal
Step 1
Enters Smart Call Home configuration mode.switch(config)# callhome
Step 2
Disables duplicate message throttling for Smart
Call Home.
switch(config-callhome) # no
duplicate-message throttle
Step 3
Duplicate message throttling is enabled by
default.
Saves the change persistently through reboots
and restarts by copying the running
configuration to the startup configuration.
(Optional) switch(config)# copy
running-config startup-config
Step 4
Example
The following example shows how to disable duplicate message throttling:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# no duplicate-message throttle
switch(config-callhome)#
What to do next
Enable Smart Call Home.
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
68
Configuring Smart Call Home
Disabling Duplicate Message Throttling