Cisco Nexus 3548 series - Default Call Home Settings; Configuring Smart Call Home

DefaultParameters
4000Destination message size for a message sent in short text
format
25SMTP server port number if no port is specified
All for full-text-destination and
short-text-destination profiles. The cisco-tac
alert group for the CiscoTAC-1 destination
profile.
Alert group association with profile
XMLFormat type
0 (zero)Call Home message level
Configuring Smart Call Home
Registering for Smart Call Home
Before you begin
• Know the sMARTnet contract number for your switch
• Know your e-mail address
• Know your Cisco.com ID
Procedure
Step 1 In a browser, navigate to the Smart Call Home web page:
http://www.cisco.com/go/smartcall/
Step 2 Under Getting Started, follow the directions to register Smart Call Home.
What to do next
Configure contact information.
Configuring Contact Information
You must configure the e-mail, phone, and street address information for Smart Call Home. You can optionally
configure the contract ID, customer ID, site ID, and switch priority information.
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
60
Configuring Smart Call Home
Configuring Smart Call Home