• short-text-destination—Supports the short text message format.
Smart Call Home Alert Groups
An alert group is a predefined subset of Smart Call Home alerts that are supported in all Cisco Nexus devices.
Alert groups allow you to select the set of Smart Call Home alerts that you want to send to a predefined or
custom destination profile. The switch sends Smart Call Home alerts to e-mail destinations in a destination
profile only if that Smart Call Home alert belongs to one of the alert groups associated with that destination
profile and if the alert has a Smart Call Home message severity at or above the message severity set in the
destination profile.
The following table lists the supported alert groups and the default CLI command output included in Smart
Call Home messages generated for the alert group.
Table 8: Alert Groups and Executed Commands
Executed CommandsDescriptionAlert Group
Execute commands based on the alert group
that originates the alert.
All critical alerts from the other alert
groups destined for Smart Call Home.
Cisco-TAC
show diagnostic result module all detail
show moduleshow version
show tech-support platform callhome
Events generated by diagnostics.Diagnostic
show diagnostic result module all detail
show moduleshow version
show tech-support platform callhome
Events related to supervisor modules.Supervisor
hardware
show diagnostic result module all detail
show moduleshow version
show tech-support platform callhome
Events related to standard or intelligent
switching modules.
Linecard
hardware
show version
show module
show running-config all
show startup-config
Periodic events related to configuration.Configuration
show system redundancy status
show tech-support
Events generated by a failure of a
software system that is critical to unit
operation.
System
show environment
show logging last 1000
show module show version
show tech-support platform callhome
Events related to power, fan, and
environment-sensing elements such as
temperature alarms.
Environmental
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
53
Configuring Smart Call Home
Smart Call Home Alert Groups
To Next Page
Loading...
