Cisco Nexus 3548 series - Guidelines and Limitations for Smart Call Home; Prerequisites for Smart Call Home

XML Tag (XML Only)Description (Plain Text and XML)Data Item (Plain Text and XML)
/aml/body/fru/slotSlot number of the FRU.FRU slot
/aml/body/fru/hwVersionHardware version of the FRU.FRU hardware version
/aml/body/fru/swVersionSoftware version(s) that is running on the
FRU.
FRU software version
The following table describes the user-generated test message format for full text or XML.
Table 14: Inserted Fields for a User-Generated Test Message
XML Tag (XML Only)Description (Plain Text and XML)Data Item (Plain Text and XML)
/aml/body/process/idUnique process ID.Process ID
/aml/body/process/processStateState of process (for example, running or
halted).
Process state
/aml/body/process/exceptionException or reason code.Process exception
Guidelines and Limitations for Smart Call Home
• If there is no IP connectivity, or if the interface in the virtual routing and forwarding (VRF) instance to
the profile destination is down, the switch cannot send Smart Call Home messages.
• Operates with any SMTP e-mail server.
Prerequisites for Smart Call Home
• You must have e-mail server connectivity.
• You must have access to contact name (SNMP server contact), phone, and street address information.
• You must have IP connectivity between the switch and the e-mail server.
• You must have an active service contract for the device that you are configuring.
Default Call Home Settings
Table 15: Default Call Home Parameters
DefaultParameters
4000000Destination message size for a message sent in full text format
4000000Destination message size for a message sent in XML format
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
59
Configuring Smart Call Home
Guidelines and Limitations for Smart Call Home