PurposeCommand or Action
profile-name can be any alphanumeric string
up to 31 characters.
address | http URL | transport-method {email
| http}} | profilename {alert-group group |
email-addr address | format {XML | full-txt
For further details about this command, see the
command reference for your platform.
| short-txt} | http URL | message-level level |
message-size size | transport-method {email
| http}} | full-txt-destination {alert-group
group | email-addr address | http URL |
message-level level | message-size size |
transport-method {email | http}} |
short-txt-destination {alert-group group |
email-addr address | http URL | message-level
level | message-size size | transport-method
{email | http}}}
Displays information about one or more
destination profiles.
(Optional) switch# show callhome
destination-profile [profile name]
Step 4
Saves the change persistently through reboots
and restarts by copying the running
configuration to the startup configuration.
(Optional) switch(config)# copy
running-config startup-config
Step 5
Example
The following example shows how to create a destination profile for Smart Call Home:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# destination-profile Noc101 format full-text
Modifying a Destination Profile
You can modify the following attributes for a predefined or user-defined destination profile:
• Destination address—The actual address, pertinent to the transport mechanism, to which the alert should
be sent.
• Message formatting—The message format used for sending the alert (full text, short text, or XML).
• Message level—The Call Home message severity level for this destination profile.
• Message size—The allowed length of a Call Home message sent to the e-mail addresses in this destination
profile.
You cannot modify or delete the CiscoTAC-1 destination profile.
Note
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
63
Configuring Smart Call Home
Modifying a Destination Profile
To Next Page
Loading...
