Cisco ONS 15454 - Page 11

TABLES
xi
Cisco ONS SONET TL1 Reference Guide, R6.0
Table 1-1 Security Default Time Outs 1-6
Table 1-2 Starting Positions for an STS-Mc SPE in an OC-12 Signal 1-7
Table 1-3 Starting Positions for an STS-Mc SPE in an OC-48 Signal 1-7
Table 1-4 Starting positions for an STS-Mc SPE in an OC-192 Signal 1-7
Table 1-5 BLSR Default Values 1-10
Table 1-6 Cross-Connections Default Values 1-10
Table 1-7 Environment Alarms and Controls Default Values 1-10
Table 1-8 Equipment Default Values 1-11
Table 1-9 Performance Default Values 1-11
Table 1-10 Ports Default Values 1-12
Table 1-11 SONET Line Protection Default Values 1-12
Table 1-12 STS and VT Paths Default Values 1-13
Table 1-13 Synchronization Default Values 1-13
Table 1-14 Testing Default Values 1-14
Table 2-1 Null Modem Adapter Pin Assignments 2-4
Table 2-2 Modes Supported by Circuit Type 2-24
Table 2-3 Number of TL1 Sessions per Platform 2-26
Table 2-4 Gateway Resource Pool 2-27
Table 2-5 Examples of Ideal ENE to GNE Resource Allocations 2-27
Table 2-6 2-Way Circuit Single or Dual Line Roll with ENT-BULKROLL 2-55
Table 2-7 2-Way Circuit Single or Dual Bulk Roll with ENT-BULKROLL 2-55
Table 2-8 1-Way Circuit Single Line Roll with ENT-BULKROLL 2-57
Table 2-9 1-Way Circuit Single Bulk Roll with ENT-BULKROLL 2-57
Table 2-10 Supported Protection Rolls 2-58
Table 2-11 Error Messages for RTRV-PM-<MOD2> 2-62
Table 2-12 Error Messages for ENT-RMONTH-<MOD2_RMON> 2-62
Table 2-13 Error Messages for DLT-RMONTH-<MOD2_RMON> 2-63
Table 2-14 Error Messages for RTRV-RMONTH-<MOD2_RMON> 2-64
Table 2-15 TMPER Type 2-66
Table 2-16 SAMPLE_TYPE 2-67
Table 2-17 STARTUP_TYPE 2-67