Cisco ONS 15454 - Log out of a Remote ENE

2-30
Cisco ONS SONET TL1 Command Guide, R6.0
Chapter 2 Procedures and Provisioning
2.3.4 Implementing TL1 Gateway
Log Out of a Remote ENE
To disconnect from a remote ENE, you must use the CANC-USER command as follows:
CANC-USER:NODE1:USERNAME:1; will disconnect ENE 1 and
CANC-USER:NODE3:USERNAME:3; will disconnect ENE 3.
The GNE forwards the logout to the remote ENEs. The GNE/ENE TCP session is closed.