Cisco ONS 15454 - Page 165

Index
IN-3
Cisco ONS SONET TL1 Reference Guide, R6.0
enable or disable reports 2-51
manage PM schedules 2-51
receive autonomous PM reports 2-50
scheduled PM report 2-50
port 2-3
protection channel access see PCA
provisioning see security levels
R
remote software download 2-49
remote test unit see RTU
retrieve see security levels
ring provisioning
1-way drop and continue 2-39
BLSR 2-31
bridge 2-34
destination node 2-41
drop and continue node 2-41
path protection to four-fiber BLSR connection 2-38
path protection to two-fiber BLSR connection 2-34
ring-to-ring interconnection 2-32
selector 2-34
source node 2-40
two-fiber BLSR to four-fiber BLSR connection 2-37
two-fiber BLSR to path protection connection 2-35
two-fiber BLSR to two-fiber BLSR connection 2-36
RMON-managed PMs 2-60
RTU 2-5, 2-19
S
scheduled PM report see PM
security, user levels 1-5
security default time outs 1-5
security levels 1-6
maintenance 1-6
provisioning 1-6
retrieve 1-6
superuser 1-6
sessions 2-1
craft interface 2-3
CTC 2-2
telnet 2-3
setting up TL1 communication 2-1
specification characters 1-2
STS-Mc SPE 1-7
superuser see security levels
T
TACC 2-5
changing test access modes 2-10
connecting test access points 2-7
deleting test access points 2-13
disconnecting test access points 2-12
loop E and F modes 2-19
mode definition 2-15
modes 2-15
modes supported by circuit type 2-24
retrieve TAP information 2-11
test access terminology 2-6
unmapped AID TAP connections 2-22
1-way circuit 2-23
2-way circuits 2-24
unmapped AID 2-24
TAP 2-5
target identifier see TID
TCA 2-60
telnet 2-3
test access point see TAP
test access see TACC
test access tab in CTC 2-5
test access terminology see TACC
test circuits 2-5
threshold crossing alerts see TCA
TID 1-1, 1-16