Contents
v
Cisco ONS SONET TL1 Reference Guide, R6.0
 
2.2.9.3 MONEF 2-17
2.2.9.4 SPLTE 2-17
2.2.9.5 SPLTF 2-18
2.2.9.6 SPLTEF 2-19
2.2.9.7 LOOPE 2-19
2.2.9.8 LOOPF 2-20
2.2.9.9 SPLTA 2-21
2.2.9.10 SPLTB 2-22
2.2.10 Unmapped AID Test Access Point Connections 2-22
2.2.10.1 1-Way Circuit 2-23
2.2.10.2 2-Way Circuits 2-24
2.2.10.3 Unmapped AID 2-24
2.3 TL1 Gateway 2-25
2.3.1 Gateway Network Element Topology 2-25
2.3.2 TL1 Sessions 2-26
2.3.3 TL1 Gateway and ENE Sessions 2-26
2.3.4 Implementing TL1 Gateway 2-28
Log Into a Remote ENE 2-29
Forward Commands by Specifying the ENE TID (Node 1 or Node 3) 2-29
Receive Autonomous Messages from the Remote ENE 2-29
Log Out of a Remote ENE 2-30
2.4 Ring Provisioning 2-31
2.4.1 Path Protection Topology 2-31
2.4.2 Path Protection Cross-Connections 2-32
2.4.3 Ring-to-Ring Interconnection 2-32
2.4.4 Path Protection to Path Protection Connection Example 2-33
2.4.5 Path Protection to Two-Fiber BLSR Connection Example 2-34
2.4.6 Two-Fiber BLSR to Path Protection Connection Example 2-35
2.4.7 Two-Fiber BLSR to Two-Fiber BLSR Connection Example 2-36
2.4.8 Two-Fiber BLSR to Four-Fiber BLSR Connection Example (ONS 15454) 2-37
2.4.9 Path Protection to Four-Fiber BLSR Connection Example (ONS 15454) 2-38
2.4.10 1-Way Drop and Continue 2-39
2.4.11 Node 1 Configuration Example (Source Node) 2-40
2.4.12 Node 2 Configuration Example (Drop and Continue Node) 2-41
2.4.13 Node 3 Configuration Example (Destination Node) 2-41
2.5 PCA Provisioning 2-41
2.5.1 Provision a PCA Cross-Connection 2-42
2.5.2 Retrieve a PCA Cross-Connection 2-42
2.6 FTP Software Download 2-43