Introduction
Connecting the Equipment
Cisco RV180/RV180W Administration Guide 13
1
STEP 5 Connect the power adapter to the Cisco RV180/RV180W power port (12VDC).
CAUTION Use only the power adapter that is supplied with the device. Using a different
power adapter could damage the device.
STEP 6 Plug the other end of the adapter into an electrical outlet. You may need to use a
specific plug (supplied) for your country.
STEP 7 On the Cisco RV180/RV180W, push in the ON/OFF power button.
The power light on the front panel lights up green when the power adapter is
connected properly and the unit is turned on.
To Next Page
Loading...
