Smartports
Smartport Types
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 104
9
• Desktop
• Guest
• Server
• Host
• IP Camera
• IP phone
• IP Phone+Desktop
• Switch
• Router
• Wireless Access Point
Smartport types are named so that they describe the type of device connected to
an interface. Each Smartport type is associated with two Smartport macros. One
macro, called "the macro," serves to apply the desired configuration. The other,
called "the anti-macro," serves to undo all configuration performed by "the macro"
when that interface happens to become a different Smartport type.
A Smartport macro can be applied by its Smartport type statically from the GUI,
and dynamically by Auto Smartport. Auto Smartport derives the Smartport types
of the attached devices based on CDP capabilities, LLDP system capabilities,
and/or LLDP-MED capabilities.
Tabl e 1 describes the relationship of Smartport types and Auto Smartport
Tabl e 1
Smartport Type Supported by Auto
Smartport
Supported by Auto
Smartport by default
Unknown No No
Default No No
Printer No No
Desktop No No
Guest No No
To Next Page
Loading...
Need help?
General
