2
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 9
Viewing Statistics
This section describes how to view switch statistics.
It contains the following sections:
• Viewing Ethernet Interface
• Viewing Etherlike Statistics
• Viewing 802.1X EAP Statistics
• Managing RMON
Viewing Ethernet Interface
The Interface page
displays traffic statistics per port. The refresh rate of the
information can be selected.
This page is useful for analyzing the amount of traffic that is both sent and
received and its dispersion (Unicast, Multicast, and Broadcast).
To display Ethernet statistics:
STEP 1 Click Status and Statistics > Interface. The Interface page opens.
STEP 2 Enter the parameters.
• Interface—Select the type of interface and specific interface for which
Ethernet statistics are to be displayed.
• Refresh Rate—Select the time period that passes before the interface
Ethernet statistics are refreshed. The available options are:
- No Refresh—Statistics are not refreshed.
- 15 Sec—Statistics are refreshed every 15 seconds.
- 30 Sec—Statistics are refreshed every 30 seconds.
To Next Page
Loading...
Need help?
General
