Configuring Discovery
Configuring CDP
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 76
7
Configuring CDP
This section describes how to configure CDP.
It contains the following topics:
• Setting CDP Properties
• Editing CDP Interface Settings
• Displaying CDP Local Information
• Displaying CDP Neighbors Information
• Viewing CDP Statistics
Setting CDP Properties
CDP Overview
Similar to LLDP, CDP (Cisco Discovery Protocol) is a link layer protocol for directly
connected neighbors to advertise themselves and their capabilities to each other.
Unlike LLDP, CDP is a Cisco proprietary protocol.
CDP Configuration Workflow
The followings is sample workflow in configuring CDP on the switch. You can also
find additional CDP configuration guidelines in the LLDP/CDP section.
• Enter the CDP global parameters using the CDP Properties page
• Configure CDP per interface using the Interface Setting page
• If Auto Smartport is to detect the capabilities of CDP devices, enable CDP
in the Smartport Properties page.
See the Identifying Smartport Type section for a description of how CDP is used
to identify devices for the Smartport feature.
The
CDP Properties
page
enables entering CDP general parameters.
To enter CDP properties:
STEP 1 Click Administration > Discovery - CDP > Properties. The CDP Properties page
opens.
STEP 2 Enter the parameters.
To Next Page
Loading...
Need help?
General
