Cisco SF200-24 - Flash Memory

Managing System Logs
Viewing Memory Logs
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 20
3
To view log entries, click Status and Statistics > View Log > RAM Memory. The
RAM Memory page
opens.
The top of the page has a button that allows you to Disable Alert Icon Blinking.
Click to toggle between disable and enable.
This page displays the following fields:
• Log Index—Log entry number.
• Log Time—Time when message was generated.
• Severity—Event severity.
• Description—Message text describing the event.
To clear the log messages, click Clear Logs. The messages are cleared.
Flash Memory
Flash Memory
The Flash Memory page
displays the messages that were stored in Flash
memory, in chronological order. The minimum severity for logging is configured in
the Log Settings page. Flash logs remain when the switch is rebooted. You can
clear the logs manually.
To view the Flash logs click Status and Statistics > View Log > Flash Memory.
The
Flash Memory page opens.
This page displays the following fields:
• Log Index—Log entry number.
• Log Time—Time when message was generated.
• Severity—Event severity.
• Description—Message text describing the event.
To clear the messages, click Clear Logs. The messages are cleared.