3
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 16
Managing System Logs
This section describes the System Log feature, which enables the switch to keep
several independent logs. Each log is a set of messages recording system events.
The switch generates the following local logs:
• Log sent to the console interface
• Log written into a cyclical list of logged events in RAM and is erased when
the switch reboots.
• Log written to a cyclical log-file saved to Flash memory and persists across
reboots.
In addition, you can send messages to remote SYSLOG servers in the form of
SYSLOG messages.
This section contains the following sections:
• Setting System Log Settings
• Setting Remote Logging Settings
• Viewing Memory Logs
Setting System Log Settings
You can enable or disable logging on the Log Settings page, and select whether
to aggregate log messages.
Severity Levels
You can select the events by severity level. Each log message has a severity level
marked with the first letter of the severity level concatenated with a dash (-) on
each side (except for Emergency that is indicated by the letter F). For example, the
log message "%INIT-I-InitCompleted: … " has a severity level of I, meaning
Informational.
To Next Page
Loading...
Need help?
General
