General Administrative Information and Operations
System Information
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 45
6
• Locale—Locale of the first language. (This is always English.)
• Language Version—Language package version of the first or English
language.
• Language MD5 Checksum—MD5 checksum of the language file.
• Locale—Locale of the second language.
• Language Version—Language package version of the second language.
• Language MD5 Checksum—MD5 checksum of the secondary language
file.
General PoE Status on models with PoE capability:
• Maximum Available PoE Power (W)—Maximum available power that can
be delivered by the PoE.
• Total PoE Power Consumption (W)—Total PoE power delivered to
connected PoE devices.
• PoE Power Mode—Port Limit or Class Limit.
Configuring the System Settings
To enter system settings:
STEP 1 Click Administration > System Settings. The System Settings page opens.
STEP 2 Modify the system settings.
• System Description—Displays a description of the switch.
• System Location—Enter the location where the switch is physically located.
• System Contact—Enter the name of a contact person.
• Host Name—Select the host name:
- Use Default—The default hostname (System Name) of these switches is:
switch123456, where 123456 represents the last three bytes of the
switch MAC address in hex format.
- User Defined—Enter the hostname. Use only letters, digits, and hyphens.
Host names cannot begin or end with a hyphen. No other symbols,
punctuation characters, or blank spaces are permitted (as specified in
RFC1033, 1034, 1035).
To Next Page
Loading...
Need help?
General
