General Administrative Information and Operations
Monitoring the Fan Status and Temperature
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 49
6
Monitoring the Fan Status and Temperature
The Health page displays the switch fan status and temperature on the following
devices:
SG200-50P
The page displays the fan status only on the rest of the devices.
To view the switch health parameters, click Status and Statistics > Health. The
Health
page opens.
The
Health
page displays the following fields:
• Fan Status—Fan status. OK indicates that the fans are operating normally.
• Temperature—The internal temperature of the switch.
Defining Idle Session Timeout
The
Idle Session Timeout
configures the time interval during which the HTTP
session can remain idle before it times out and the user must login again to
reestablish the session.
• HTTP Session Timeout
• HTTPS Session Timeout
To set the idle session timeout of an HTTP or HTTPS session:
STEP 1 Click Administration > Idle Session Timeout. The
Idle Session Timeout
page
opens.
STEP 2 Select the timeout for the session from the corresponding list. The default
timeouts are 10 minutes.
STEP 3 Click Apply to set the configuration settings on the switch.
To Next Page
Loading...
