Cisco SGE2000 User Manual

97
Chapter 5: Configuring Device Interfaces
Defining LAG Settings
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
5
Lag Settings Page
The Lag Settings Page contains the following fields:
• Copy from Entry Number — Copies the LAG information from the selected port.
• To Entry Number(s) — Indicates the ports to which the port QoS information is copied.
• LAG — Displays the LAG Id number.
• Description — Displays the user-defined port name.
• Type — The port types that comprise the LAG.
• Status — Indicates if the LAG is currently operating.
• Speed — The configured speed at which the LAG is operating.
• Auto Negotiation — The current Auto Negotiation setting.
• Flow Control — The user-designated Flow Control setting.
2.
Click the Edit button. The Lag Configuration Settings opens:

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg