Cisco SGE2000 User Manual

101
Chapter 5: Configuring Device Interfaces
Configuring LACP
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
5
LACP Parameter Settings Page
The LACP Parameter Settings Page contains the following fields:
• Port — Defines the port number to which timeout and priority values are assigned.
• LACP Port Priority — Defines the LACP priority value for the port. The field range is 1-65535.
• LACP Timeout — Administrative LACP timeout. The possible field values are:
– Short — Defines a short timeout value.
– Long — Defines a long timeout value. This is the default value.
3. Define the relevant fields.
4. Click Apply. The LACP Parameters settings are defined, and the device is updated.

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg