Cisco SGE2000

113
Chapter 6: Configuring VLANs
Configuring GVRP Settings
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
6
– Enabled — Enables GVRP on the selected interface.
– Disabled — Disables GVRP on the selected interface.
• Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is enabled on the interface. The
possible field values are:
– Enable — Enables Dynamic VLAN creation on the interface.
– Disable — Disables Dynamic VLAN creation on the interface.
• GVRP Registration — Indicates if VLAN registration through GVRP is enabled on the device. The
possible field values are:
– Enable — Enables GVRP registration on the device.
– Disable — Disables GVRP registration on the device.
3. Define the relevant fields.
4. Click Apply. GVRP settings are modified, and the device is updated.