Cisco SGE2000

250
Chapter 16: Viewing Statistics
Viewing Ethernet Statistics
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
16
EAP Page
The EAP Page contains information about EAP packets received on a specific port. The EAP Page page
contains the following fields:
• Unit Number — Indicates the stacking member for which the EAP statistics are displayed.
• Port — Indicates the port, which is polled for statistics.
• Refresh Rate — Defines the amount of time that passes before the interface statistics are refreshed.
The possible field values are:
– 15 Sec — Indicates that the Etherlike statistics are refreshed every 15 seconds.
– 30 Sec — Indicates that the Etherlike statistics are refreshed every 30 seconds.
– 60 Sec — Indicates that the Etherlike statistics are refreshed every 60 seconds.
– No Refresh — Indicates that the Etherlike statistics are not refreshed.
• Frames Receive — Indicates the number of valid EAPOL frames received on the port.
• Frames Transmit — Indicates the number of EAPOL frames transmitted via the port.
• Start Frames Receive — Indicates the number of EAPOL Start frames received on the port.
• Log off Frames Receive — Indicates the number of EAPOL Logoff frames that have been received
on the port.