265
Chapter 16: Viewing Statistics
Managing RMON Statistics
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
16
• Rising Event — Selects an event which is defined in the Events table that triggers the rising
threshold alarm. The Events Table is displayed in the RMON Events page.
• Falling Threshold — Displays the falling counter value that triggers the falling threshold alarm.
The falling threshold is graphically presented on top of the graph bars. Each monitored variable is
designated a color.
• Falling Event — Selects an event which is defined in the Events table that triggers the falling
threshold alarm. The Events Table is displayed in the RMON Events page.
• Startup Alarm — Displays the trigger that activates the alarm generation. Rising is defined by
crossing the threshold from a low-value threshold to a higher-value threshold.
• Interval — Defines the alarm interval time in seconds.
• Owner — Displays the device or user that defined the alarm.
2. Click the Add button. The Add RMON Alarm Page opens:
Add RMON Alarm Page
The Add RMON Alarm Page contains the following fields:
• Alarm Entry — Indicates a specific alarm.
• Interface — Displays the interface for which RMON statistics are displayed. The possible field v
values are:
– Port — Displays the RMON statistics for the selected port.
– LAG — Displays the RMON statistics for the selected LAG.
• Counter Name — Displays the selected MIB variable.
To Next Page
Loading...
Need help?
General
