Cisco SGE2000 User Manual

44
Chapter 4: Configuring Device Security
Defining Authentication
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
TACACS+ Page
The TACACS+ Page contains the following fields:
• Source IP Address — Displays the device source IP address used for the TACACS+ session
between the device and the TACACS+ server.
• Key String — Defines the authentication and encryption key for TACACS+ server. The key must
match the encryption key used on the TACACS+ server.
• Timeout for Reply — Displays the amount of time that passes before the connection between the
device and the TACACS+ server times out. The field range is 1-30 seconds.
• Host IP Address — Displays the TACACS+ Server IP address.
• Priority — Displays the order in which the TACACS+ servers are used. The default is 0.
• Authentication Port — Displays the port number through which the TACACS+ session occurs. The
default is port 49.
• Single Connection — Maintains a single open connection between the device and the TACACS+
server when selected
• Status — Displays the connection status between the device and the TACACS+ server. The possible
field values are:
– Connected — There is currently a connection between the device and the TACACS+ server.
– Not Connected — There is not currently a connection between the device and the
TACACS+ server.
2. Click The Add button. The Add TACACS+ Server Page opens:

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg