EasyManuals Logo

Cisco SGE2000 User Manual

Cisco SGE2000
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
56
Chapter 4: Configuring Device Security
Defining Access Method
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
Secure Telnet (SSH) — Assigns SSH access to the rule. If selected, users accessing the
device using Telnet meeting access profile criteria are permitted or denied access to the
device.
HTTP — Assigns HTTP access to the rule. If selected, users accessing the device using
HTTP meeting access profile criteria are permitted or denied access to the device.
Secure HTTP (HTTPS) — Assigns HTTPS access to the rule. If selected, users accessing the
device using HTTPS meeting access profile criteria are permitted or denied access to the
device.
SNMP — Assigns SNMP access to the rule. If selected, users accessing the device using
SNMP meeting access profile criteria are permitted or denied access to the device.
Source IP Address — Defines the interface source IP address to which the rule applies.
Prefix Length — Defines the number of bits that comprise the source IP address prefix, or the
network mask of the source IP address.
Action — Defines the action attached to the rule. The possible field values are:
Permit — Permits access to the device.
Deny — Denies access to the device. This is the default.
Remove — Removes rules from the selected access profiles. The possible field values are:
Checked — Removes the selected rule from the access profile.
Unchecked — Maintains the rules attached to the access profile.
2. Click the Add button. The Add Profile Rule Page opens:
Add Profile Rule Page
The Add Profile Rule Page contains the following fields:
Access Profile Name — Defines the access profile name. The access profile name can contain up to
32 characters.

Table of Contents

Other manuals for Cisco SGE2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SGE2000 and is the answer not in the manual?

Cisco SGE2000 Specifications

General IconGeneral
Jumbo Frame Support9KB
VLANsUp to 256
ManagementWeb-based, SNMP, CLI
StandardsIEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions440 x 44 x 257 mm
Power Supply100 to 240V AC, 50-60 Hz
Operating Temperature0°C to 40°C
Storage Temperature-20 to 70°C (-4 to 158°F)
Humidity10% to 90% non-condensing
Weight3.2 kg

Related product manuals