UNITY INSTALLATION GUIDE
98
Testing the
Continued
integration
f Retrieve the message and confirm that the message waiting
indicator is off.
If the MWI is not off, see Chapter 5 of the Unity Trouble-
shooting Guide.
To test the hunt group
a Busy the first voice messaging port.
b From an external line, call the test extension. The first avail-
able port should take the call.
c Busy the next port, and repeat step b.
d Repeat step c until all the ports have been busied. When all
the ports are busied, the phone system should do whatever
you programmed it to do when all lines are busy. If some-
thing else happens, check the phone system programming.
To test identified subscriber messaging
Call the test extension from another extension. The Status
Monitor should identify the extension from which you are
calling.
If the extension is not identified, either the phone system
does not support identified subscriber messaging or there is
a problem with the phone system.
Next section
TURNKEY SYSTEM
All configurations What’s next, page 113
COMPONENT SYSTEM
All configurations What’s next, page 113
To Next Page
Loading...
Need help?
General
