UNITY INSTALLATION GUIDE
106
Upgrading a Unity or
Continued
ActiveFax server
Installing Microsoft Data Access Components
Do the following procedure if you are upgrading Unity software
to version 2.4.
To install MDAC version 2.5 or later
a Insert the Unity compact disc in the CD-ROM drive.
b Browse to the directory Mdac.
c Run Mdac_typ.exe.
Upgrading the Unity software and installing
ActiveFax
To install ActiveFax on a separate server
Do this procedure if you are moving ActiveFax from the Unity
server to a separate server.
You install ActiveFax first. When you upgrade the Unity software
on the Unity server, you are prompted to specify the name of the
server on which ActiveFax is installed. The Unity Setup program
then verifies that ActiveFax is running on that server.
a Confirm that the ActiveFax system key is connected to the
ActiveFax server.
b Confirm that all fax boards have been installed and set up
according to the “Hardware settings” instructions for your
boards in Appendix A.
c Log on to Windows NT/2000 by using the account you chose
to use for installation. For more information, see “The
account used for installation on the Unity server,” on
page 69.
d Insert the Unity compact disc in the CD-ROM drive.
e Browse to the root directory of the Unity compact disc, and
run Setup.exe.
f Choose the language in which you want to view Setup
prompts, and click “OK.” A welcome message appears.
To Next Page
Loading...
Need help?
General
