Citrix ADC MPX Series User Manual

Citrix ADC MPX
The reset takes approximately 60 seconds. You are then redirected to the logon page.
7. Log on to the LOM GUI by using your default credentials.
Note: If the certificate or key is invalid, the BMC reboots, tries the new settings, and reverts to
using the previous settings.
8. In the address bar, click the lock icon to display the connection tab, as shown in the following
screenshot.
© 1999-2019 Citrix Systems, Inc. All rights reserved. 146

Citrix ADC MPX Series Specifications

General

Type	Application Delivery Controller
Memory	Up to 256 GB
Power Supply	Redundant
Product Series	MPX
Ports	10/25/40/100 Gbps Ethernet
Operating System	Citrix ADC
Management	Citrix ADM
Form Factor	Rack-mountable