Citrix ADC MPX Series - Citrix ADC MPX 25 Xxx-40 G

Citrix ADC MPX
Citrix ADC MPX 25xxx-40G
October 25, 2019
The Citrix ADC MPX 25100/25160/25200 40G are 2U appliances. Each model has two 10-core proces-
sors, 256 GB of memory, four 40G QSFP+ ports, and sixteen 10G SFP+ ports (4x40G QSFP+ 16x10G
SFP+).
The following figure shows the front panel of the MPX 25100/MPX 25160/25200 40G appliances.
Figure 1. Citrix ADC MPX 25100 40G, MPX 25160 40G, MPX 25200 40G, front panel
• RS232 serial Console Port.
• 10/100Base-T copper Ethernet Port (RJ45), also called the LOM port. You can use this port to
remotely monitor and manage the appliance independently of the Citrix ADC soware.
• Network Ports. Four 40G QSFP+ ports and sixteen 10G SFP+ ports (4x40G QSFP+, 4x10G SFP+,
4X10G Base-T).
Note the following points regarding the network ports on MPX 25100 40G and MPX 25160 40G appli-
ances:
• 10G ports do not support 1G copper or 1G fiber transceivers.
• 40G ports do not support 10G and 1G transceivers.
© 1999-2019 Citrix Systems, Inc. All rights reserved. 74