Citrix ADC MPX Series User Manual

Citrix ADC MPX
Perform a warm restart remotely from another computer on the network, type
ipmitool ‒U <bmc_gui_username> ‒P <bmc_gui_password> ‒H <bmc IP address> mc
reset cold
Perform a core dump
If the appliance fails or becomes unresponsive, you can remotely perform a core dump. This proce-
dure has the same eect as pressing the NMI button on the back panel of the appliance.
Perform a core dump by using the GUI
1. In the Menu bar, click Remote Control.
2. Under Options, click NMI, and then click Initiate NMI.
Perform a core dump remotely from another computer on the network by using the shell
At the shell prompt, type:
ipmitool -U <bmc_gui_username> -P <bmc_gui_password> -H <bmc IP address>
chassis power diag
Restore the BMC configuration to factory defaults
March 26, 2019
You can restore the BMC to its factory-default settings, including deleting the SSL Certificate and SSL
key.
Reset the configuration to factory defaults by using the GUI
1. Navigate to Maintenance > Factory Default.
2. Click Restore.
Reset the configuration to factory defaults by using the shell
At the shell prompt, type:
ipmitool raw 0x30 0x40
© 1999-2019 Citrix Systems, Inc. All rights reserved. 152

Citrix ADC MPX Series Specifications

General

Type	Application Delivery Controller
Memory	Up to 256 GB
Power Supply	Redundant
Product Series	MPX
Ports	10/25/40/100 Gbps Ethernet
Operating System	Citrix ADC
Management	Citrix ADM
Form Factor	Rack-mountable