Citrix ADC MPX Series - Citrix ADC MPX 14 Xxx-40 G

Citrix ADC MPX
Citrix ADC MPX 14xxx-40G
October 25, 2019
The Citrix ADC MPX 14020-40G, MPX 14040-40G, MPX 14060-40G, MPX 14080-40G, MPX 14100-40G are
2U appliances. Each model has two 6-core processors, 64 GB of memory, four 40G QSFP+ ports, and
sixteen 10G SFP+ ports (4x40G QSFP+ + 16x10G SFP+).
The following figure shows the front panel of the 14xxx-40G appliance.
Figure 1. Citrix ADC MPX 14020/14040/14060/14080/14100-40G (4x40G QSFP+, 16x10G SFP+), front
panel
• RS232 serial Console Port.
• 10/100Base-T copper Ethernet Port (RJ45), also called the LOM port. You can use this port to
remotely monitor and manage the appliance independently of the Citrix ADC soware.
• Two 10/100/1000Base-T copper Ethernet Management Ports (RJ45), numbered 0/1 and 0/2 from
le to right. These ports are used to connect directly to the appliance for system administration
functions.
• Network Ports, sixteen 10G SFP+ ports (16x10G SFP+).
Note: the following points regarding the network ports on 14000 FIPS appliances:
• 10G ports do not support 1G copper or 1G fiber transceivers.
• 40G ports do not support 10G and 1G transceivers.
The following figure shows the back panel of the 14xxx-40G appliance.
Figure 2. Citrix ADC MPX 14020/14040/14060/14080/14100-40G (4x40G QSFP+, 16x10G SFP+), back
panel
© 1999-2019 Citrix Systems, Inc. All rights reserved. 50