Citrix ADC MPX Series - Citrix ADC MPX 15000

Citrix ADC MPX
Citrix ADC MPX 15000
October 25, 2019
The Citrix ADC MPX 15000 appliance is a 2U appliance. This platform has two 8-core processors and
128 GB of memory. The appliance provides a total of 16 Ethernet 25G ports.
For information on the soware releases supported on the Citrix ADC hardware platforms, see
Hardware-Soware Release Matrix.
The following figure shows the front panel of the MPX 15xxx series appliances.
Figure 1. Citrix ADC MPX 15xxx, front panel
The Citrix ADC MPX 15xxx series appliances have the following ports:
• RS232 serial console port.
• One 10/100/1000Base-T RJ45 copper Ethernet LOM Port. Use this port to remotely monitor and
manage the appliance independently of the Citrix ADC soware.
• One 10/100/1000Base-T RJ45 copper Ethernet Management Port, numbered 0/1. This port is
used to connect directly to the appliance for Citrix ADC administration functions.
• Sixteen 25G Ethernet ports, numbered 25/1 to 25/16.
The following figure shows the back panel of the MPX 15xxx appliance.
Figure 2. Citrix ADC MPX 15xxx, back panel
The following components are visible on the back panel of the MPX 15xxx appliance:
• Two 480 GB removable solid-state drives (SSD). These appliances have a redundant array of in-
dependent disks (RAID) devices. In a RAID configuration, the same data is stored on multiple
© 1999-2019 Citrix Systems, Inc. All rights reserved. 56