Citrix ADC MPX
2. To remove the DAC, pull the tab on the top of the DAC, and then pull the DAC out of the port, as
shown in the following figure.
Figure 12. Remove a DAC from the 10G port
Safety, cautions, warnings, and other information
February 25, 2019
Note: For the list of safety certifications, standards, and ROHS compliance for each model, see the
datasheet. The datasheet is available on www.citrix.com. Hover your mouse pointer on Products,
and in the Networking list, select Citrix ADC.
Safety statements
The safety statements below provide the caution and danger information you need to know, before
installing the product.
Statement 1:
Danger: Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
• Do not connect or disconnect any cables or perform installation, maintenance, or reconfigura-
tion of this product during an electrical storm.
© 1999-2019 Citrix Systems, Inc. All rights reserved. 105
To Next Page
Loading...
Need help?
General
