Citrix ADC MPX Series - Wiping Your Data before Sending the ADC Appliance to Citrix

Citrix ADC MPX
Health Attribute Recommended Range
System Fan Speed (RPM) 6700–8600
System Fan 1 Speed (RPM) 6600–8500
System Fan 2 Speed (RPM) 6700–8500
CPU 0 Temperature (Celsius) 40–57
CPU 1 Temperature (Celsius) 35–45
Internal Temperature (Celsius) 30–49
Power Supply 1 Status NORMAL
Power Supply 2 Status NOT PRESENT–NORMAL
Wiping your data before sending the ADC appliance to Citrix
August 28, 2019
The configuration wipe scripts remove all customer proprietary information from a Citrix ADC appli-
ance before Return Merchandise Authorization (RMA) or return from evaluation. The scripts are de-
signed to give the customer a high level of confidence that all their information has been removed.
Caution: Running these scripts is dangerous. If something goes wrong during execution, the appli-
ance might be rendered unbootable and Citrix might have to reinstall the soware image. The config
wipe scripts remove everything on the box, including licenses, configuration, images, and scripts. Run
these scripts only aer understanding the consequences.
Supported Platforms
The script is supported on all Citrix ADC MPX appliances. The script is not supported on Citrix ADC SDX
appliances. Delete the VPX instances before returning the SDX appliance.
Required script files
The following script files must be present in the /flash/.recovery directory. They are required for suc-
cessfully wiping out the data.
• rc.conf_wipe_subr
• rc.flash_wipe_recover
© 1999-2019 Citrix Systems, Inc. All rights reserved. 165