CITROEN 2005 C4-XSARA-XSARA PICASSO BERLINGO - Engine

117
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder block
Crankshaft bearing cap cover.
Tightening method:
Pre-tighten the 10 screws (17)
(from 1 to 10) to 1
Pre-tighten the 14 screws (19)
(from 11 to 24) to 0,6
Tighten the 2 screws (18)
(inside the flywheel bell housing) to 0,8
Slacken the screws (17) by 180°
Tighten the 10 screws (17)
(from 1 to 10) to 3
Tighten the screws (17)
(from 1 to 10) by 140°
Tighten the 14 screws (19) (from 11 to 24) to 0,8
Engines: 9HY - 9HZ
B1DP1LLD
(17) Bearing cap fixing screws (screws M9)
(18) Crankshaft bearing cap cover screws (screws M6)
(19) Crankshaft bearing cap cover screws (screws M6)
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 117