190
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: KFU
Tools.
[1] Flywheel setting peg : 4507-T.A
[2] Camshaft setting peg : 4533-T.AC1
[3] Camshaft setting peg : (-).0194.A
[4] Belt retaining pin : 4533-TA.D
IMPERATIVE: Respect the safety and cleanliness requirements.
Setting the timing.
Raise and support the vehicle, wheels hanging.
Disconnect the battery.
Remove the engine cover.
Raise and support the vehicle, wheels hanging.
Remove:
- The accessories drive belt (3)
(see corresponding operation)
.
- The crankshaft pulley, the engine cover.
- The upper timing cover (1).
- The oil filter (2).
Remove the sparking plugs to facilitate rotation of the engine.
Suspend the engine.
Remove the screws (4), the upper RH engine support (5) and the screws (6).
B1BP37QD
B1BP37RC
C4
To Next Page
Loading...
