CITROEN 2005 C4-XSARA-XSARA PICASSO BERLINGO - Engine

261
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: WJY
Setting the timing (continued).
Peg the camshaft hub, using tool [4].
Peg the injection pump hub, using tool [3].
Slacken screws (5) and (6).
Slacken screw (9) of the tensioner roller (8).
Remove the timing belt.
Refitting.
Retighten screws (5) and (6) by hand.
Turn the pinions (10) and (7) clockwise in order to place them at end of slots.
Fit the timing belt on the crankshaft.
Hold the belt, using tool [5].
Position the timing belt in the following sequence:
- Guide roller (11).
- Injection pump pinion (7).
- Camshaft pinion (10).
- Coolant pump pinion (12).
- Tensioner roller (8).
B1EP16PD
B1EP1EDC
B1EP132C
XSARA
B1EP1EEC
Angl.-t2-page240-282-2005 9/01/06 10:16 Page 261