217
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Tools.
[1] Camshaft setting peg : (-) 0189.A
[2] Crankshaft setting peg : (-).0189.R
[3] Timing belt retaining pin : (-).0189.K
[4] Adaptor for angular tightening : 4069-T
[5] Tool for moving and locking the tensioner roller : (-).0189.S
[5a] : (-).0189.S1
[5b] : (-).0189 S2
Pliers for removing plastic pins : 7504-T
Checking the setting of the timing.
Removing.
Disconnect the battery negative terminal
(see corresponding operation)
.
Raise and support the vehicle, front wheels hanging.
Remove:
- The front RH wheel.
- The plastic pins (1).
- The splash-shield (2).
- The upper timing cover.
C4AP12TC
XSARA - XSARA PICASSO
Engines: 6FZ - RFN
To Next Page
Loading...
