171
ENGINE
XSARA
AUXILIARY EQUIPMENT DRIVE BELT
Without power-assisted steering, with air conditioning
Tool.
[1] Belt tension measuring instrument : 4122-T
Removal.
Loosen the screws (1).
Tighten the screw (2) until it is against its stop.
Remove the belt.
Refitting.
Refit the belt.
Fit the tool [1] at "e".
Tighten the screw (2) to obtain: 106 ± 10 SEEM units.
Tighten the screws (1) to 2 m.daN.
Remove the tool [1].
B1BP1SGCB1BP1SFC
Engine: WJY
To Next Page
Loading...
