90
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder block
22 Crankshaft bearing cap sealing screw 1 ± 0,1
Con rod cap bolt (*)
23 Pre-tightening 1
Tightening 2,3 ± 0,1
Angular tightening 46°±3°
24 Knock sensor 2 ± 0,5
Accessories drive belt pulley screw
25 Tightening 4 ± 0,4
Angular tightening 80°±5°
Engine: RFK
B1DP1KTP
(*) = IMPERATIVE: Respect the tightening sequence
(see following page).
C4
To Next Page
Loading...
