159
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Engine: NFV
With air conditioning
XSARA PICASSO
B1BP235C
Tools.
[1] Pliers for removing plastic pegs : 7504 -T
[2] Belt tension measuring instrument : 4122 -T
[3] 10 mm square
(drain spanner)
[4] TORX spanner
Remove.
Detension the automatic tensioner, tool [3].
Place a Ø 6 mm peg at (a) to immobilise the automatic tensioner.
Remove the belt.
Refit.
Position the belt.
Detension the automatic tensioner, tool [3].
Remove the Ø 6 mm peg.
Release the automatic tensioner.
Remove the tool [3].
To Next Page
Loading...
