87
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder head
Cylinder head bolts (*)
1st pre-tightening 1,5 ± 0,1
12 2nd pre-tightening 5 ± 0,5
Angular slackening 360°
Tightening 2 ± 0,2
Angular tightening 285° ± 5°
Valve cover screws (*)
13 Pre-tightening 0,5
Tightening 1,1 ± 0,1
14 Sparking plugs 2,7 ± 0,2
Camshaft bearing cap cover screws (*)
15 Pre-tightening 0,5
Tightening 1,1 ± 0,1
16 Valve for injection of air to the exhaust 0,9 ± 0,2
Engine: RFK
B1BP35QP
(*) = IMPERATIVE: Respect the tightening sequence
(see following page).
C4
To Next Page
Loading...
